The Web Pendant will teach you how to perfect your wrapping techniques by creating a web-like weaved wires. You’ll also learn how to make loops and use these techniques in creating various designs for wire jewelry.
4 x 8cm (3 inches) 0.6mm (22ga) wire
0.3mm (28 ga) wire
8pcs 0.4mm beads
4pcs 0.3mm beads
Then bend the wires in opposite directions.
Step 8: Securing the wires
Bend the rest of the wires in opposite direction to ensure the wires are locked in place.
Step 9: Weaving the web
Take your 28ga wire. Working directly from the spool wrap the wire twice onto the web frame.
After wrapping twice bring the wire up and under then wrap again twice onto the next web frame.
Then bring the wire up and over then wrap again twice onto the next web frame.
Wrap neatly, until you can trim the ends of the web frame and have about .60 inches or 1.5cm left.
Step 11:Slide in a 0.4mm bead then bend the wire like so.
With your nose pliers, grip bent wire and make a full turn until you create a loop.
Repeat Step 11 for the rest of the web frame.
Step 13: Covering the knots.
Take 4 x 0.3mm beads and with your 28ga wire wrap and weave it onto the center of the web to cover the knotted wires.
Lastly, attach a jump ring and you’re done!
For the complete tutorial you can DOWNLOAD A FREE PDF COPY HERE
FREE 3-month trial of DIY Beading Magazine at iPad Newsstand! Use Current Subscriber Code: dbm3mmar15